926 S Arizona Ave · Butte, Montana
Mon–Fri 10–7 · Sat–Sun 9–7 · (406) 498-6671

UltraComfort Venice power lift recliner raised to the standing-assist position

Lift Chairs in Butte, MT — UltraComfort · FDA Class II

The wrong size won’t lift you.

Seat height, seat depth and back height all have to match your body. Seat widths run 18.5″ to 29″. That’s a fitting, not a photo on a website.

Why fit comes first

A chair you can’t stand up out of.

It’s the most common mistake people make buying a lift chair online: they order by weight capacity and colour, the chair arrives, and it doesn’t fit. Too deep and your feet don’t reach the floor. Too tall and the lift pitches you forward instead of up.

There’s a second question almost nobody asks, and it decides whether the chair physically works in your room: how far can it sit from the wall? Across this line that ranges from 15 inches to 30. We ask before you drive in.

Signature tool

Fit Finder

Six questions, built on UltraComfort’s own May 2026 spec sheet. It narrows the size, the zone count and the chairs worth trying — then you confirm the real one in the showroom.

1 · How tall are you?


2 · Build



3 · What’s hardest right now?



4 · How wide is the space the chair goes in?



5 · Transfers

6 · Which hand works the control best?

Seat size to start from
Medium
Zone level — count positions, not features

Worth sitting in

    This narrows the search — it doesn’t replace the fitting. Seat width, seat depth and back height get measured against your body in the showroom, and we’ll tell you if none of these are right.

    Book My Comfort Fitting

    Positions

    Count the positions, not the features.

    One chair, one afternoon — three of the eight positions a 5 Zone reaches. A 1 Zone reaches two.

    01 / 03
    UltraComfort Venice power lift recliner in the seated upright position
    UltraComfort Venice power lift recliner raised to the standing-assist position
    UltraComfort Venice power lift recliner reclined into the Zero Gravity Plus position


    1 Zone

    2
    positions — lift and recline
    • Standing assist
    • Two recline positions
    2 Zone

    2 + Stellar
    patented Stellar positioning
    • Independent back and footrest
    • 4-way motion seat
    4 Zone

    6
    infinite positioning
    • Adds headrest and lumbar
    • TV, Sleep, Zero Gravity
    • Trendelenburg — feet above the heart
    5 Zone

    8
    adds patented Eclipse Tilt
    • Everything in 4 Zone
    • Zero Gravity Plus
    • Rejuv
    Two features nobody asks for

    And one of them is free.

    Left-side hand control

    A no-charge option — but only on some models, and not on any imported chair. If you’ve had a stroke and one side is weaker, or you’re simply left-handed, the control sitting on the wrong arm is the difference between using the chair independently and needing help every time.

    It costs nothing, it narrows which chairs will work for you, and almost nobody knows to ask. It’s question six in the Fit Finder.

    SmartTek diagnostics

    Every UltraComfort chair has patented LED diagnostics built in. If something goes wrong, a technician can identify most electrical faults over the phone instead of scheduling a visit.

    If your real worry is being stranded in a chair that stopped working, that’s the answer to it.

    How a fitting works

    Thirty minutes, start to finish.

    1. You book a timePick a slot online or call. We’ll ask how far the chair can sit from the wall before you drive in.
    2. We measure you, not the chairSeat height against your lower leg, seat depth against your thigh, back height against your shoulders.
    3. We count the positions you’ll actually useZones, not motors. If you’ll never use Trendelenburg, you shouldn’t be paying for a chair that has it.
    4. You stand up out of each oneThe only test that matters. If it doesn’t get you up cleanly, it’s the wrong chair.
    5. You get it in writingA written recommendation with the model, the size and the price — whether you buy that day or not.
    6. Delivery and setupWe bring it in, set it up, and show whoever helps you how it works.
    The floor

    Chairs you can sit in this week.

    UltraComfort Venice power lift recliner in Slate, seated upright
    Venice · 5 Zone · Nirvana standard
    UltraComfort Venice power lift recliner in the Zero Gravity Plus position
    Venice · Zero Gravity Plus
    UltraComfort Aiden power lift recliner in the Rejuv wellness position
    Aiden · narrowest 5 Zone in the line

    Questions

    Lift chairs, answered

    Three measurements decide it: seat height against your lower leg, seat depth against your thigh, and back height against your shoulders. Seat widths across this line run from 18.5 inches to 29. Weight capacity matters too — chairs are rated to 400 pounds, with two models rated to 600 — but it’s the measurement people over-weight. A chair rated well above you can still be the wrong chair.

    That depends on wall clearance — how far the chair has to sit from the wall to fully recline. Across this line it ranges from 15 inches to 30. The Aspen needs as little as 15; a full-featured 5 Zone typically needs more, though the Aiden manages it in 20.5. Tell us your clearance when you book and we’ll have chairs on the floor that actually work in your room.

    UltraComfort power lift recliners are classified by the FDA as Class II medical devices, intended to assist persons with chronic physical disablements. That’s a regulatory classification of the device, not a treatment claim and not a promise about your condition. It’s also why the seat lift mechanism can be eligible for Medicare Part B in the first place.

    Yes, and the feature that matters is Straight Lift — it raises you vertically instead of tipping you forward, which is what makes a caregiver-assisted or wheelchair transfer workable. UltraComfort describes the ability to choose how the chair lifts as unique to their chairs, and it can be set locally at no charge on every chair we stock except the Aspen.

    One honest trade-off: Mid Lift, the gentler gradual setting, is available on every model except the 5 Zone chairs with Eclipse Tilt. Maximum positioning and maximum transfer flexibility pull against each other slightly. Tell us transfers are the priority and we’ll fit for that first.

    Zones are how many parts of the chair move independently, and they’re countable. One zone gives you two positions — lift and recline. Two zones adds patented Stellar positioning. Four zones brings you to six positions including Trendelenburg, feet above the heart. Five zones adds the patented Eclipse Tilt, which unlocks Zero Gravity Plus and Rejuv — eight positions total.

    We’d rather count positions with you than argue about price. If you’ll never use half of them, you shouldn’t be buying them.

    UltraComfort warrants the lift frame, wood chair frame, recline bar and scissor mechanism for life. Fabric, leather, foam, padding and labour are covered one year. The Nirvana massage and HeatWave systems carry their own two-year warranty.

    Electrical components depend on where the chair was built. On the American-made chairs it’s seven years — fully covered for the first three, then pro-rated through year seven. On the imported models it’s three years. That difference is worth knowing before you choose, and it’s one of the reasons we’ll point you at a domestic chair when it’s close.

    Two things that catch people out: warranty parts ship free in the first year only, and exceeding the chair’s rated weight capacity voids the warranty entirely — which is another reason the fitting matters.

    UltraComfort’s HeatWave uses far infrared, which they state penetrates up to three inches into tissue, and they say it may help with inflammation, joint pain, circulation and sleep. Nirvana is a Swedish air massage — ten air chambers across more than 500 square inches, with separate zones for lumbar, glutes and hamstrings, in fifteen-minute cycles.

    Those are the manufacturer’s descriptions and their hedging, and we’ll repeat them as such rather than promise you an outcome. The useful version of this question gets answered by sitting in one with the heat on.

    The Comfort Fitting

    Sit in it before you buy it.

    Free, thirty minutes, no obligation. Bring whoever helps you at home — they should try the controls too.

    Book My Comfort Fitting

    Mattress Mart Direct

    Sit & Sleep Factory Direct Outlet.
    A mile from the pit.

    Hours

    Mon–Fri 10am–7pm
    Sat–Sun 9am–7pm

    Service area

    Anaconda, MTDeer Lodge, MTWhitehall, MTPhilipsburg, MTDillon, MT

    Also Boulder & Twin Bridges — call for timing

    © 2026 Mattress Mart DirectBuilt on SOAR OS


    Secret Link